Flood Stop Repairs in Bethesda
If you’re reading this, there is a solid chance you might not know what a flood stop is. You’ve come to the right place. A flood stop is a plumbing device that is placed onto a water heater so that if it senses any moisture leaking into the pan below, it will then automatically shut off the water supply to your hot water tank. It will trigger an alarm, and the flood stop will start to beep, alerting you that the water tank is now leaking. If this happens, all of your other plumbing systems, appliances, faucets, and toilets are still operating fine, but any water going into the water heater will be stopped.
The flood stop is one of the most crucial and essential types of plumbing equipment, so you should always pay attention to it when problems start to occur. When a disaster has occurred, and flood-stop repairs are a necessity, you have to have the most dependable plumbing team right by your side.
What Does a Flood Stop Truly Look Like?
A flood stop that is installed on your hot water heater has one distinct look. There is a small sensor that is going to be down on the water heater. It sits inside a small pan. If it does sensor moisture, the valve at the top will automatically close as soon as it senses a bit of water. Any water that is blocked from coming into a water tank by this valve. The control unit is usually located on the wall closest to the water heater and flood stop.
Why is a Flood Stop a Necessity for Your Bethesda Property?
Well, a flood stop or automatic water shut-off is quite essential in your attic because if there was a water leak and you did not know about it, your ceiling could collapse onto your property. However, a flood stop prevents any extensive flooding and water damage anywhere inside of your house since it stops the water from continuing to fill up your water tank if it is leaking.
What if My Bethesda Property’s Hot Water Tank Has a Random Leak?
Now, if it was not leaking for some reason but the hot water tank exploded or had a bad leak, all the water inside the tank will come out, whether you’ve got a flood stop or not. However, the flood stop won’t keep additional water from continuing to flow from your pipes leading into the water heater. So, if you did not have the flood stop on your hot water tanks and there was a bad leak, water would then keep leaking until somebody discovered it. And if you were away, it would leak until someone were to discover it. Having a flood stop installed on your property’s water heater and washing machine is an intelligent safety precaution to take to prevent any flooding and protect your house from any water damage.
How Flood Stops Sound the Alarm
Not only do flood stops help shut off a water source to the water heater, but they are also able to alert a resident in different ways. An alarm similar to a smoke detector can be set off once the floor stop detects a leak and then shuts off the water. A few models could also be linked to smart devices that can notify someone remotely if they aren’t nearby. If a shut-off mechanism works correctly, the leak should be minimized or contained. The water contained inside of the tank of the water heater could still leak and spill out over the water heater pan despite the incoming water to the water heater.
If you need a flood stop installed, or a floor stop repair for your Bethesda property, give Master Plumbing’s team a call today!
Dependable and Expert Bethesda Plumbers Are Ready to Help
At Master Plumbing, we have a fully-staffed, certified, and equipped team of plumbers who are all experienced in the plumbing industry. From water heater replacements, sewer line repairs, or any smaller fixes you may need, Master Plumbing can give you a hand with whatever plumbing problems you might be experiencing in your Adams Morgan residence.
We want you to know that your home’s plumbing system is in the right hands with us. Not only will we complete any required repairs and replacements in an efficient and timely manner, but we will also make sure that everything is working correctly moving forward.